Home Background Basic Well Drilling Steps Real Well Drilling Beginner's Tips from Bill Making a PVC Drill Bit Making a Metal Drill Bit User Submitted Drill Bits Making the Drillhead Making the Handle Drilling Part 1 Drilling Part 2 Flushing The Well Adding Pipe About Gravel Packs & Well Screens  Installation of Gravel Packs & Well Screens Drilling Deeper with BENTONITE Sand Drilling 1 Sand Drilling 2 Using a Marsh Funnel Drill 10 Feet Deeper When the Pipe Sticks PVC Couplers Pump Installation Geothermal Heat Pump Electric Bill War One Hose Well Drilling  Auger Drilling  Misc. Tips  Groundwater Other Videos Improving Well Production Low GPM? Success Stories! from a REAL Well Driller Another Home Driller! Using a Mud Pump Mud Pump with Portable Mud Pit  Mud Pump Drill Bits Mud Pump vs. Hoses Questions Sources of Supply My Links Well Drilling Manuals Well Drilling Links 

 

Drilling Part 2

How to Drill Your Own Well - Part 2

 

The video below is a continuation of the instructional video begun in Part 1.   It shows the well being drilled from 13 to 29 feet. 

 

 

 

 

HOW TO DRILL YOUR OWN WELL - PART 2

Please pay particular attention to the water bearing sand in the video.  Actually, any sand that is signficantly under the water table is water bearing sand and it is OK to place the well screen in it.  Ideally, you are looking for sand that is just a little bigger than the other sand you have been digging through.  The sand at the end of this video is that perfect water bearing sand.

 

NEXT:  Flushing the Well

 

 

 

      drillyourownwell.com