Home Background Basic Well Drilling Steps Real Well Drilling Beginner's Tips from Bill Making a PVC Drill Bit Making a Metal Drill Bit User Submitted Drill Bits Making the Drillhead Making the Handle Drilling Part 1 Drilling Part 2 Flushing The Well Adding Pipe About Gravel Packs & Well Screens  Installation of Gravel Packs & Well Screens Drilling Deeper with BENTONITE Sand Drilling 1 Sand Drilling 2 Using a Marsh Funnel Drill 10 Feet Deeper When the Pipe Sticks PVC Couplers Pump Installation Geothermal Heat Pump Electric Bill War One Hose Well Drilling  Auger Drilling  Misc. Tips  Groundwater Other Videos Improving Well Production Low GPM? Success Stories! from a REAL Well Driller Another Home Driller! Using a Mud Pump Mud Pump with Portable Mud Pit  Mud Pump Drill Bits Mud Pump vs. Hoses Questions Sources of Supply My Links Well Drilling Manuals Well Drilling Links 

 

SUCCESS!

Matt - St. Augustine, Florida

 

Congratulations to Matt in St, Augustine, Florida for a successful well!  Matt got a little tired of the nation's oldest city ripping him with a water bill so he did something about it.  He drilled 27 feet.  With two parallel wells he reports just short of 10 GPM and it is running his sprinkler system just fine.

 

 

If this isn't a dramatic demonstration of using this method to drill a well,
I've never seen one.  That is Matt on the roof!  He is helping his friend,
Clay (on the ground), drill a well.

 

 


Here is the style of wellpoint Matt used. 1.25 inch galvanized.
This wellpoint is made for driving but will work just fine as long
as it will fit down your drillpipe.  Here Matt uses a three inch drillpipe.

 


Matt put in two parallel wells to get the output he needed.  Note how
he has made the lines running from each equidistant to the tee.

 




Matt's well in action!




Next Success Story

 

 

 

      drillyourownwell.com